Why Some Everyday Objects Have Strange Little Holes
By WowPebble Editorial
Learn how pen vents, plant-pot drains, window openings and SIM-tray holes work, with documented examples and clear limits for different products.

Small holes can let air or water pass, provide access, or form part of a product's safety design. Their appearance alone is not enough to identify the purpose. A hole in a pen cap, one in the pen barrel and one in an aircraft window can involve very different systems.
These examples separate documented functions from guesses about an unidentified object.
A pen cap and a pen barrel are different cases
BIC's Cristal technical illustration, PDF page 6 describes two separate openings: the cap hole is associated with the BS 7272-1 standard, while the barrel opening balances pressure inside and outside the pen. Giving both holes the explanation “it stops the ink drying” would miss that distinction.
Vented caps belong to the subject of airway safety: ISO's historical public specification explicitly describes ventilation and airflow requirements. That edition is withdrawn; the current standard's public abstract describes reducing asphyxiation risk, not eliminating it. A hole is not a guarantee that an inhaled cap is safe. A suspected blocked airway requires emergency assistance, not reliance on a vent.
Drainage needs an exit, but product details matter
For plant containers, University of Illinois Extension explains the connection: water needs to drain so air remains available to roots. Waterlogged growing medium leaves less room for air. Different plants have different needs; the hole is not a watering schedule.
Check the planting pot itself, not just its decorative outer cover. If runoff remains trapped in the outer container, the presence of an inner drainage hole alone does not tell you the roots are out of standing water. See the related guide to watering houseplants while away for a different practical question.
A padlock example needs equally careful naming. Master Lock's extreme-environment cover sheet identifies a drain in the cover's keyway cap. That verifies a drainage feature in that accessory; it does not identify every hole drilled into a metal lock body. Nor does a drain automatically mark a lubrication point. Master Lock's care instructions identify the keyway and shackle as lubrication locations. For another model, use its own instructions.
A hole can affect pressure without opening a cabin to the sky
Aircraft-window terminology can be confusing because an “inner” structural pane is not necessarily the pane nearest your fingers. Bombardier's published technical background describes a three-pane arrangement with a cabin-side scratch pane and a vent in the middle structural pane. The vent connects the cabin with the space between structural panes, rather than forming an open passage through the outer pane.
This is an assembly-specific explanation, not permission to diagnose every visible window mark. Read why an airplane window has a tiny hole for the layer-by-layer explanation and its limits.
Shoe eyelets can change the route of the laces
ASICS's lacing guide describes a runner's loop using additional eyelets to form loops, followed by passing each lace through the opposite loop. This changes how the laces hold the foot; the upper holes are not simply interchangeable ventilation holes.
The demonstrated arrangement has a particular eyelet layout. It is not evidence that every spare opening on every shoe has that purpose, or that this lacing cures rubbing caused by an unsuitable shoe. Use the illustrated manufacturer's pattern for a compatible shoe rather than tightening an unfamiliar arrangement indiscriminately.
A utensil opening may have a second, model-specific role
Water passing through a colander while larger food remains behind is an observable separation mechanism. It does not follow that every kitchen-tool hole is also a standardized measure.
For a specific counterexample, Zyliss explicitly describes its spaghetti server's central hole as a portion guide. That supports the function for that product, not a universal serving weight for every spoon. Follow a utensil's stated measure or use a scale when a quantity matters; a similar-looking opening is not a calibration certificate.
Access holes require identification before use
Apple's SIM-tray instructions direct users to the hole beside the identified tray, with model-specific location guidance. They also say not to force it and note that some models have no physical tray.
That is a procedure for a named opening, not a reason to insert a pin into any small hole on a phone. Identify the model and diagram first. If the opening cannot be matched, its function remains unknown; its size and position alone are not proof.
A useful check before accepting a “secret purpose”
For an unidentified opening, ask what exact product is involved, whether the explanation identifies the same component, and whether the manufacturer or technical document supports that role. A documented feature on one model is a good example, not a universal rule.
You might also like

Why Airplane Windows Have That Tiny Hole — And 7 Other Design Details You Never Noticed
Understand the bleed hole in a conventional multi-pane airplane window, how it affects pressure, and seven other documented everyday design details.

8 Surprising Things Hiding in Plain Sight
Explore eight overlooked details, from tactile paving and print marks to bottle bases and fuel arrows, with documented purposes and limits to each explanation.

Why Do Bricks Have Holes Through the Middle?
Those holes in bricks are no accident. They help make bricks lighter and more efficient to produce, and can serve practical purposes once the wall is built.